If you have discovered that you have a termite problem, it is important to take action right away. Termites can cause a lot of damage to your home, and if left untreated, the problem can get worse. One of the best ways to deal with termites is by using our termite bait system from Malaysia. In this blog post, we will teach you how to install termite bait stations properly!
Identifying Termite Bait Stations
Termite bait stations are cellulose and termiticide-filled cylinders. This is placed on the ground, ideally where the colony can be found or where it has been discovered passing through. This baiting system’s purpose is to entice termites into the food supply. Keep in mind that the poison utilized here is a slow-acting toxin.
As a result, after they consume the termiticide-laced cellulose, the poisons will be distributed throughout the colony, resulting in exponential mortality.
Installing Termite Bait Stations
In using termite bait stations, you must know the necessary steps in doing so. Here they are:
Step One: Preparation of Materials
You must first prepare the materials before excavating around your house. To excavate the installation places, you’ll need a posthole digger or a shovel. However, some bait station systems include a digging tool, so you won’t have to go looking for one.
The bait stations should then be prepared. Keep in mind that one bait station should be placed every 10 feet around the building. This translates to a dozen or more stakes or cylinders.
Fill it with cellulose after you have all of the bait ingredients. Typically, wood shavings or tiny bits of wood are used. You won’t use a termiticide straight immediately during the pre-baiting phase. This is crucial for determining the termites’ dietary patterns.
Step Two: Mapping Out of Spots for Installations
After you have all of the materials in place, it’s time to map out where you’re going to install the bait stations. It would help if you decided where you’ll bury the baits ahead of time. This will help you figure out how many cylinders you’ll need and how much work you’ll be doing.
The idea is to circle the structure with baits spaced ten to fifteen feet apart and at least two feet away from any foundation or portion of your house. It’s time to start digging now that you’ve highlighted the locations.
Step Three: Digging Holes on the Ground
You can use the digging tool that comes with the box, depending on the size of the baits. You may dig with a shovel or borrow a posthole digger for larger baits.
The depth required should be sufficient to bury the cylinder’s body while leaving the aperture exposed on the ground’s surface.
This is required so that you may check it periodically. You’ll also add extra wood and the slow-acting termiticide that will kill the bug after the pre-baiting step is over.
Step Four: Burying the Cylinders
After you’ve excavated the holes, place the cylinder inside. Cover the top so you can easily observe it. You must make certain that the baits are securely embedded in the earth.
If the holes are too large for the cylinders, just fill in the gaps with earth. After that, you’re ready to go. However, this does not indicate that your work in removing termites is complete.
Step Five: Monitoring Your Bait
You must be patient since termite baiting might take months. When you find termites, though, it’s time to put the hazardous bait in the cylinder.
You should now check each cylinder weekly after applying the delayed-action poison to the bait. The termite population eating on the baits may take weeks or months to see a drop.
You can presume the colony has been eliminated after the baits are empty of termites. However, don’t get too comfortable. Inactive bait should be placed again as a detecting tool for subsequent infestations.
FAQ’s About Termite Bait Stations
Here are some of the most frequently asked questions about termite bait stations:
How Far From the House Should Termite Bait Stations Be Placed?
Ideally, bait stations should be placed around the house every ten feet. However, this may vary depending on the size of your home.
Are Termite Bait Stations Worth It?
The answer to this question is yes. Termites can cause a lot of damage to your home, so it’s important to take action as soon as possible. Installing bait stations is one way to do that.
Do DIY Termite Bait Stations Work?
Yes, they do. However, termite baiting solutions aren’t all created equal. It’s important to follow the instructions carefully in order to get the best results.
Conclusion
As you can see, there is no need to be intimidated by the idea of installing a termite bait station. The process is actually quite simple, with just five steps. Given these few tips and tricks, your home will soon be less susceptible to destructive termites. If you have more questions in mind, let us know by contacting us today!