Heat Treatment For Termites

Heat Treatment For Termites

If you have termites, the best way to get rid of them is through heat treatment. This process involves heating up the entire building until the termites die. It is a non-toxic and environmentally friendly way to get rid of these pests, and it is also very effective. In this blog post, we will discuss how heat treatment works and why it is such an effective method for getting rid of termites.

When to Use Heat Treatment for Termites

If you think you have a termite problem, it is best to call our professional termite specialist. They will be able to determine if heat treatment is the best solution for your situation. Not all buildings are suitable for heat treatment, so it is important to get an expert opinion.

Heat treatments are only used when termites are found inside the building. If they are found outside, then a different treatment method will be used.

Advantages of Heat Treatment

Advantages of Heat Treatment

Heat treatments are a very effective way to kill termites. Termites cannot survive when the temperature reaches 120 degrees Fahrenheit, so they are killed immediately. The process is also very quick – it only takes a few hours to heat up an entire building.

Heat treatment is non-toxic and environmentally friendly. There are no harmful chemicals used in this process, and it does not produce any hazardous waste products.

  • It Is Good for Homes That Are Near the Water
  • It Kills Termites Instantly
  • It Uses Zero Chemicals

The Process of Heat Treatment for Termites

The Process of Heat Treatment for Termites

When using heat treatments for termites in your home, it is important that you know the steps to do so. Here are the steps to heat treatments:

Step 1: Structure Inspection

An exterminator’s initial step will be to inspect your structure. They will find the termites and devise a treatment strategy. They will also determine whether heat treatment is safe for use in the home based on the materials used in the building, among other factors.

See also  How To Get The Most Out Of Your Termite Inspection

After the exterminator has completed the initial inspection of your home, they will proceed to the next phase.

Step 2: Removing Appliances and Items in Your Home

Before the exterminator begins the heat treatment process, they will ask you to remove any appliances or items from your home. This is because these objects can be damaged and can block the heaters from reaching all of the areas in your home.

Step 3: Having Your Home Sealed

Once you have removed all of the appliances and items from your home, the exterminator will then seal off all of the entrances and exits to your home. This is done to ensure that the termites do not escape during the treatment process.

Step 4: Setting up of Special Hoses and Thermal Probes

The next stage is to install metal probes into your home’s timber beams. This is required in order for the exterminators to keep track of the temperature inside. Also, if the wood has reached a temperature high enough to kill the termites, it will be their sensor.

They will also place the huge hoses into the room or region that requires treatment. The hot air from the heaters will be funneled into your home through these hoses.

Step 5: Having the Heaters Run

The exterminators will place the special heaters in your garage after everything is in place. They’ll keep running the heater until the thermal probes read about 130F to 140F. Exterminators may employ heat up to 160 degrees Fahrenheit in some circumstances.

The exterminators will leave the wood alone for at least thirty-five minutes once the correct temperature has been established from within.

Step 6: Monitoring the Temperature

Once the heaters have run, the exterminators will then check the thermal probes and the hoses to see if they have been effective. They will also be checking the temperature inside your home to make sure that it is high enough to kill all of the termites.

See also  How To Get The Most Out Of Your Termite Inspection

Step 7: Removal of Hoses and Thermal Probes

After the exterminators have verified that the treatment has been successful, they will then remove all of the hoses and thermal probes and leave your home open for ventilation. You must not enter your home yet after this process due to high heat, and exterminators will have to inspect your home again.

Step 8: Final Inspection

The exterminators will do a final inspection of your home after the treatment is complete. If all looks good, they will give you the go-ahead to enter your home.

In addition, they will also check for damage caused by the treatment, which rarely happens.

FAQ’s About Heat Treatments

Here are some of the most frequently asked questions about heat treatments:

How Do You Prepare Heat Treatment for Termites?

You should prepare for heat treatment by removing all of the items from your home, including appliances. You will also need to seal off all of the entrances and exits to your home.

Is Heat Treatment as Effective as Fumigation?

Heat treatment is just as effective, if not more so than fumigation. Fumigation uses chemicals that can be harmful to humans and pets. Heat treatment does not use any harmful chemicals.

How Long Does Heat Treatment for Termites Last?

Heat treatments take less than a day, and the termites are usually dead within hours.


Heat treatment for termites is a great way to get rid of these pests without using harsh chemicals. If you’re considering this option, make sure you do your research first and find a reputable company with experience in the field.

We hope this blog post has informed you of the things you must know about heat treatment for termites. If you have more questions in mind, feel free to contact us today!

Leave a Comment

Your email address will not be published. Required fields are marked *